Description
Instructions
1. Remove shock from bike
2. Attach one way valve directly to the shock via a small section of the black piping (you may want to purchase a small piece of the black air pipe explicilty for this purose)
3. Connect otherside of one way valve to existing compressor line >> inflate shock
4. Unclip existing compressor line , leaving pipe & one way valve attched to shock
5. Submerse in water & watch for PROFUSE & OBVIOUS air bubbles
** Note – pin head sized bubbles will float every second or so – this is normal – shocks lose around 20-30 psi over night & are designed to be inflated each time before riding
